About Qalyptus Documentation

Enable HTTPS using Qlik Sense certificate - Qalyptus Server

When you install Qalyptus Server in the same machine as Qlik Sense Enterprise you can use the Qlik Sense Certificate to run Qalyptus Server with HTTPS.

Enable HTTPS for Qalyptus Server
To enable https do the following:

  1. In the machine where Qalyptus Server is installed, open “Qalyptus Server Configuration”
  2. Go to ‘General’ tab
  3. Enter the Qalyptus Server user credentials
  4. Check the checkbox ‘Use https’
  5. Click Save
  6. Open ‘Manage Computer Certificates’
  7. Open details of the Qlik Sense Certificate in Personal folder
  8. Copy Thumbprint value (Ctrl+C)
  9. Remove spaces in the Thumbprint using a text editor
  10. Add the Thumbprint to this command line:
    http add sslcert ipport=0.0.0.0:<port> certhash=‎‎<certificate thumbprint> appid={guid}
  • port: Qalyptus Server port
  • certificate thumbprin: thumbprin of you certificate
  • guid: any guid
  1. Open PowerShell as Administator

  2. Type the following commands

    • >netsh
    • netsh>http add sslcert ipport=0.0.0.0:<3994> certhash=‎‎111111111111aaaaaaaa1111111111111111111 appid={50f3e7d8-2e1e-4a6e-8953-a993fe6e653e}
  3. Now you can use Qalyptus Server with https

Note that the HTTP url will no longer work.

Enable HTTPS for Qalyptus Server - Video